The new line of MLux LED lamps series: RED, ORANGE, GREY – revolution in technical specifications with honest performance!
Have you ever thought about the importance of true characteristics when buying one or another product? It can be both physical quantities – power (W), luminous flux (lm), color temperature (°K), as well as more sophisticated features, for example +150%, +200%.
All MLux lighting specifications are checked using professional measuring equipment from SEKONIC and UPRTEK. For this reason, technical specifications and performance of MLux products are true – no tricks or cheating!
MLux LED - GREY Line lamps with a luminous flux of up to 1995 lm** with a power consumption of 26 W* have a COB chip (Chip-On-Board). Despite the low cost of this model, light output reaches 38,37 lm/W* (on average, a halogen lamp can produce 14,5 lm/W*).
The use of a luminophore made it possible to get color temperature options of 4300, 5000, 6000°K without reducing the luminous flux due to eliminating the use of all kinds of correction filters mounted on top of the LED.
MLux LED - GREY Line can be installed on most modern cars, including freight transport and special machinery with an on-board voltage of 9-30 V. The protection class IP67 allows safe use even in aggressive environmental conditions. The voltage controller, as well as protection against polarity reversal, short circuit and voltage surges guarantee a long service life.
Because the most critical factor in the life of the led is the temperature, we paid special attention to the passive and active cooling.
Mounting of LEDs on an aluminum substrate ensures heat rejection directly to the aluminum body, bypassing the dielectric layer.
Thermal grease does not dry out and remains flexible throughout its entire service life, displacing air between the substrate and the aluminum casing, which increases thermal conductivity.
The body of pure aluminum has a high heat transfer coefficient, which significantly improves heat rejection to the radiator.
Reliable heat rejection and protection of LEDs from overheating are ensured by the compact design of a radiator with a ribbed surface for maximum contact area with air.
A cooler with a hydrodynamic sliding bearing made it possible to achieve maximum effective cooling for the COB chip (Chip-On-Board).
It is possible to adjust the lamp position to control the light border and achieve more accurate focusing in the headlight.
Installation of lamps does not require any modifications of optics, special knowledge and skills. The minimum dimensions of the cooler with a radiator make it possible to replace OEM halogen lamps without changing the design of the headlights.
Available color temperature of mono lamps in sets of the GREY Line series:
- 4300°K with light output 38,37 lm/W* (EAN: 4823106500016)
- 5000°K with light output 36,44 lm/W* (EAN: 4823106500023)
- 6000°K with light output 34,62 lm/W* (EAN: 4823106500030)
The GREY Line series mono-kit includes:
2 lamps with LED drivers, 2 W5W (T10) LEDs for marker lamps.
GREY Line mono-kits сovered by a two-year warranty.
In the event of failure during the warranty period, the only conditions for providing a warranty replacement will be: the availability of a warranty card and the absence of mechanical damages.
*performance of one lamp
**performance of two lamps