LED lamps MLux - GREY Line 9005/HB3, 26 W, 5000°К (103413363)

The new line of MLux LED lamps series: RED, ORANGE, GREY – revolution in technical specifications with honest performance!

Have you ever thought about the importance of true characteristics when buying one or another product? It can be both physical quantities – power (W), luminous flux (lm), color temperature (°K), as well as more sophisticated features, for example +150%, +200%.

For this reason, we strive to create quality products with true technical specifications and fair performance – no tricks or cheating! All our lighting specifications are checked using professional measuring equipment from SEKONIC and UPRTEK.

MLux LED - GREY Line lamps with a luminous flux of up to 1995 lm** with a power consumption of 26 W* have a COB chip (Chip-On-Board). Despite the low cost of this model, light output reaches 38,37 lm/W* (on average, a halogen lamp can produce 14,5 lm/W*).

The use of a luminophore made it possible to get color temperature options of 4300, 5000, 6000°K without reducing the luminous flux due to eliminating the use of all kinds of correction filters mounted on top of the LED.

MLux LED - GREY Line can be installed on most modern cars, including freight transport and special machinery with an on-board voltage of 9-30 V. The protection class IP67 allows safe use even in aggressive environmental conditions. The voltage controller, as well as protection against polarity reversal, short circuit and voltage surges guarantee a long service life.

Because the most critical factor in the life of the led is the temperature, we paid special attention to the passive and active cooling.

Features:

— Aluminum substrateMounting of LEDs on an aluminum substrate ensures heat rejection directly to the aluminum body, bypassing the dielectric layer.

— Thermal greaseThermal grease does not dry out and remains flexible throughout its entire service life, displacing air between the substrate and the aluminum casing, which increases thermal conductivity.

— Aluminum bodyThe body of pure aluminum has a high heat transfer coefficient, which significantly improves heat rejection to the radiator.

— Ribbed radiatorReliable heat rejection and protection of LEDs from overheating are ensured by the compact design of a radiator with a ribbed surface for maximum contact area with air.

— Active coolingA cooler with a hydrodynamic sliding bearing made it possible to achieve maximum effective cooling for the COB chip (Chip-On-Board).

— Focus adjustmentIt is possible to adjust the lamp position to control the light border and achieve more accurate focusing in the headlight.

— Easy installationInstallation of lamps does not require any modifications of optics, special knowledge and skills. The minimum dimensions of the cooler with a radiator make it possible to replace OEM halogen lamps without changing the design of the headlights.

Available color temperature of mono lamps in sets of the GREY Line series:

• 4300°K with light output 38,37 lm/W* (EAN: 4823106500016)
• 5000°K with light output 36,44 lm/W* (EAN: 4823106500023)
• 6000°K with light output 34,62 lm/W* (EAN: 4823106500030)

The GREY Line series mono-kit includes:

2 lamps with LED drivers, 2 W5W (T10) LEDs for marker lamps.
 

GREY Line mono-kits сovered by a two-year warranty.

In the event of failure during the warranty period, the only conditions for providing a warranty replacement will be: the availability of a warranty card and the absence of mechanical damages.

*performance of one lamp
**performance of two lamps